Articles

Best Way To Record Auto-Attendant Greetings

See our Blog for a more detailed description.

Download the Cheat Sheet

Conferencing

To establish a conference call

1) Establish call with one of the desired conference parties
2) Press the CONF soft-key below the LCD screen
3) Establish call with other conference party
4) Select CONF soft-key
5) Repeat steps 3-4 until all parties have been called.
6) Press the CONF soft-key a second time to connect all parties.

To place a Conference on Hold

Press the [HOLD/SAVE] button.

To retrieve the Conference on Hold
Select the CONF soft-key below the LCD screen.

To establish an Unsupervised Conference

1) Establish conference call as directed above.
2) Once all parties are connected and able to connverse, press the CONF soft-key
3) Hang up.

To retrieve an Unsupervised Conference

1) Lift the handset.
2) Select the CONF soft-key.

Using the Conference Room system

1) Outside callers dial the main number and select option 9
2) They input the Conference Room 1 password and are connected

Internal Callers can dial 591 (or press the “Conf Room 1" button) and then input the password. You are then joined to the conference

Download the CyDesk Quick Start Guide

LG IPECS
8000 Series

Clearing the Message Waiting Light

On occasion, you might have a flashing Message Waiting Light on your phone that will not clear even after deleting your voice-mail. This is often caused by a coworker inadvertently leaving a manual “Message Wait/Call Back”.  

Manually Clear the Message Waiting Light:

1. Press the MSG button (next to the scroll wheel).
2. Using the Up/Down scroll buttons, select the function that has a number greater than (000).  This will probably be number 1.
3. Press “OK”
4. Press “DELETE” for each entry.
5. Press “1” for “YES”

If more than one type of message was left, you may have to repeat the process.